03-13-2006 03:36 AM - edited 03-04-2019 03:01 AM
Hi
I have a cisco 4507 catalyst switch.
I want enable IP Classless in global mode.
But i can not do it becuse like no command in this switch.
------------------------
Cisco Internetwork Operating System Software IOS (tm) Catalyst 4000 L3 Switch Software (cat4000-I9S-M), Version 12.2(20)EWA3,
RELEASE SOFTWARE (fc1)
--------------------
So my question is can I not enable Ip classless command in cisco4507 switch?.
or if possible then how ?
any expert help me ?
thanks
Biplob
03-13-2006 03:39 AM
Hi,
I think you will find that the reason you cannot configure the 'ip classless' command is because the switch always operates in a classful manner and you don't have the option of enabling classless routing.
Hope that helps - pls rate the post if it does.
Paresh
03-13-2006 03:49 AM
Hello,
It should be possible to have the switch operate in a classless manner. Do you have ip routing enabled?
Refer to this document for reference:
HTH
Leon
* Please rate useful posts.
03-13-2006 06:58 AM
IP classful routing is not supported in 4500. The command ip classless is not supported as classless routing is enabled by default.
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat4000/relnotes/ol_5184.htm#wp16976
03-13-2006 08:47 PM
Hi
Thanks to all for help
thanks
biplob
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide