Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

4507 switch ip classless

Hi

I have a cisco 4507 catalyst switch.

I want enable IP Classless in global mode.

But i can not do it becuse like no command in this switch.

------------------------

Cisco Internetwork Operating System Software IOS (tm) Catalyst 4000 L3 Switch Software (cat4000-I9S-M), Version 12.2(20)EWA3,

RELEASE SOFTWARE (fc1)

--------------------

So my question is can I not enable Ip classless command in cisco4507 switch?.

or if possible then how ?

any expert help me ?

thanks

Biplob

4 REPLIES
Purple

Re: 4507 switch ip classless

Hi,

I think you will find that the reason you cannot configure the 'ip classless' command is because the switch always operates in a classful manner and you don't have the option of enabling classless routing.

Hope that helps - pls rate the post if it does.

Paresh

Silver

Re: 4507 switch ip classless

Hello,

It should be possible to have the switch operate in a classless manner. Do you have ip routing enabled?

Refer to this document for reference:

http://www.cisco.com/en/US/products/hw/switches/ps4324/products_configuration_guide_chapter09186a00801cddc0.html

HTH

Leon

* Please rate useful posts.

Cisco Employee

Re: 4507 switch ip classless

IP classful routing is not supported in 4500. The command ip classless is not supported as classless routing is enabled by default.

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat4000/relnotes/ol_5184.htm#wp16976

New Member

Re: 4507 switch ip classless

Hi

Thanks to all for help

thanks

biplob

1104
Views
5
Helpful
4
Replies
CreatePlease to create content