10xs for ur reply.can i run HSRP BETWEEN 6509-sup1 & 4507R?i used the command mls rp vtp-domain TEST On the 6509 ;but i can't use it on the 4507.now what the effect will be with the that command on the 4507
You should certainly be able to run HSRP between the 6509 and the 4507R. The command mls rp vtp-domain has to do with multi-layer switching (MLS) and is not really required for HSRP. MLS simply allows the switch to perform routing shortcuts and does not have to be enabled for HSRP to work.
Hi Paresh,i have already the 4507 installed and configured without HSRP,Recentely i've installed an old 6509-sup1-2ge as redudancy for this 4507R.now I will wait an OFF Day to configured the HSRP On the 4507r.now we prepare the 2nd fiber shelf and the cabling for this.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...