Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

4507R VLAN config

Dear all,

Can anybody tell me how you would configure 2 x 4507R switches, that are interconnected via the Supervisor engines (using GBEC) to route between networks that sit on a single VLAN ?

I have been told that we would need to setup multiple VLAN's on the 4507R's (one for each network).

Hope this makes sense !

Thanks.

2 REPLIES
Cisco Employee

Re: 4507R VLAN config

New Member

Re: 4507R VLAN config

I am assuming you are using two netowrks ie 10.1.1.0/24 and 172.16.1.0/24 on the same vlan. If so you can create a vlan interfce and eanble a primary ip address and a secondary address.

ie

interface vlan 2

ip address 10.1.1.1 255.255.255.0

ip address 172.16.1.1 255.255.255.0 secondary

no shut

you can now route betwenn these networks even though you are using a single vlan.

Hope this helps

112
Views
0
Helpful
2
Replies