Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

48-port Fa Module Etherchannel Capabilities

Hello,

I want to obtain detailed info on etherchannel capabilities of WS-X6348-RJ-45 and WS-X6248-RJ-45 fastethernet modules. For example is there restriction of using adjacent ports ? Can I use e.g. 2/1-2 for one channel and 2/3-4 for another channel? Or 2/1-4 for one channel and 2/5-8 for another channel?

Best Regards.

1 REPLY
Cisco Employee

Re: 48-port Fa Module Etherchannel Capabilities

Ports need not be contiguous or on the same module, but channel members must be from the same card type(you cannot mix 6248 and 6348)

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sw_6_3/confg_gd/channel.htm#1020670

http://www.cisco.com/warp/public/473/49.html

137
Views
0
Helpful
1
Replies