Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

4900M IOS crash, abort at PC 0x0

Hello.

Last week, random days device 4900M is self restarted and after load i see "abort at PC 0x0"

Maybe you can help find ?

In attachment present crashdump

=======================================
System returned to ROM by abort at PC 0x0
System restarted at 15:17:23 EETST Sun Aug 24 2014
System image file is "bootflash:cat4500e-entservicesk9-mz.152-2.E.bin"
Sushi Revision 11, Tatooine Revision 141, Forerunner Revision 1.83

Last reload reason: abort at PC 0x0

2 ACCEPTED SOLUTIONS

Accepted Solutions
Hall of Fame Super Gold

You're chassis is running 15

You're chassis is running 15.2(2)E????

 

No need to look any further.  Downgrade your IOS.  15.2(2)E is not a stable IOS on any model of switches from Catalyst 3K and up.

New Member

We are having the same

We are having the same problem.

Unfortunately for us, this software seems to be better for us, as it seems to fix numerous bugs since the previous version we were running.
With 15.2(2)E  everything seems to work, but the switches crash every now and then.

We are running a high version mostly due to features wanted like ipv6 routing in vrf, however, we have not been able to find a decent software version yet to do so.

We have a case running via our support, but so far no news.

4 REPLIES
Hall of Fame Super Gold

You're chassis is running 15

You're chassis is running 15.2(2)E????

 

No need to look any further.  Downgrade your IOS.  15.2(2)E is not a stable IOS on any model of switches from Catalyst 3K and up.

New Member

any word on this case?  we

any word on this case?  we are in the same boat using this in our dev environment specifically for ipv4/ipv6 vrf routing and just had a random reboot.

New Member

It has been linked to Bug ID:

It has been linked to Bug ID: CSCuq71667

Should be solved in a release expected to come out end of april.

New Member

We are having the same

We are having the same problem.

Unfortunately for us, this software seems to be better for us, as it seems to fix numerous bugs since the previous version we were running.
With 15.2(2)E  everything seems to work, but the switches crash every now and then.

We are running a high version mostly due to features wanted like ipv6 routing in vrf, however, we have not been able to find a decent software version yet to do so.

We have a case running via our support, but so far no news.

439
Views
10
Helpful
4
Replies
CreatePlease to create content