I started getting a bunch of these on one of my 4908G-L3's as well. I've got no problem with the "CRC error" side of the error message, but the AAL5 facility code (ATM Adaption Layer 5) confuses me. There are ATM interfaces on my 4908G-L3?
The reason you are getting these errors is not because you have ATM interfaces connected to your 4908G-L3 but because the backplane of the 4908G and 2948G use a form of ATM. I had the same problem on a 2948G and had to RMA it to Cisco. I would recommend that you capture a show tech from your switch and post in the Output Interpreter on CCO. Based on the output of that, you should must likely open a case with Cisco TAC.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.