Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

500 Express Switch issues with voice vlans

Trying to configure a port on a 500 Express switch to be in access mode in the voice vlan so that a separate router can be connected to this. The gui won't let me assign the voice vlan in access mode ?!?! I have to be missing something here . . .

To see what I'm trying to accomplish, here is the config I would use on a 3560:

-----

vlan 2

name data

vlan 3

name voice

int fa0/1

description to voice router (2811)

switchport mode access

switchport access vlan 3

int fa0/2

description to data router (1700)

switchport mode access

switchport access vlan 2

int range fa0/3 - 24

switchport trunk encapsulation dot1q

switchport trunk native vlan 2

switchport mode trunk

switchport voice vlan 3

mls qos trust device cisco-phone

spanning-tree portfast

-----

No problem configuring the port to the data side router. No problem configuring the ports to trunk for data/voice vlan for PCs connected through cisco phones.

Only problem is getting the port that connects (in access mode) to the voice router to be in the voice vlan.

Any help would be appreciated.

1 REPLY
New Member

Re: 500 Express Switch issues with voice vlans

Figured it out - upgraded to 12.2(25)SEG

Once I did that, I was able to select a port role of "Server" and then by clicking "Customize" I was able to select access vlan "Cisco-Voice" and Server Type "Trusted" even though it's going to a router. Heh. Gotta love the gui.

106
Views
0
Helpful
1
Replies
CreatePlease to create content