Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

585 LRE CPE (with 2950-24LRE)

Voice (POTS phone) and data work fine on the same line, except when the phone rings.

The link auto-negotiates 10Mbps, but when the phone rings the link is lost and the devices have to re-negotiate.

There is only one phone plugged directly into the phone port on the CPE.

If I force the link to run at only 5Mbps, the problem does not occur.

Do I need to use the LRE 48 POTS Splitter? (I hope not, as I only have 10 CPE's).

1 REPLY
Silver

Re: 585 LRE CPE (with 2950-24LRE)

You dont have to use a LRE 48 POTS Splitter since it is used only whenyou have more than 24 CPE devices.

You can get information on troubleshooting 585 LRE CPE from the following documene:

http://www.cisco.com/en/US/products/hw/switches/ps605/products_configuration_guide_chapter09186a0080112d29.html

84
Views
0
Helpful
1
Replies
CreatePlease to create content