Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

6260 DSLAM problem

My customer is performing the following testing scenerio:

827 CPE --- 6260 DSLAM ----------- Cisco 3660

ATM

The 6260 got 2 problems at the moment.

1. An error message 'NI2 module loss of active clock sync'

2. the interface ATM1/1 connected to 827 trains itself repeatedly

The 827 is directly connected to 6260 using RJ11 connectors

and then to 3660 using a fibre.

Does anyone have idea how to solve these problems?

Here are the config

6260:

boot system flash:ni2-dsl-mz.20-8.DA4

slot 1 atuc-1-4dmt

!

dsl-profile default

network-clock-select 1 ATM0/1

ip subnet-zero

!

atm address 47.0091.8100.0000.0003.fe57.5401.0003.fe57.5401.00

atm router pnni

no aesa embedded-number left-justified

node 1 level 56 lowest

redistribute atm-static

!

!

!

interface ATM0/0

no ip address

no ip directed-broadcast

no ip mroute-cache

atm cac service-category abr deny

atm maxvp-number 0

!

interface Ethernet0/0

no ip address

no ip directed-broadcast

no ip mroute-cache

shutdown

!

interface ATM0/1

no ip address

no ip directed-broadcast

no ip mroute-cache

atm ilmi-keepalive

!

interface ATM1/1

no ip address

no ip directed-broadcast

no atm ilmi-keepalive

atm pvc 4 100 interface ATM0/1 4 100

!

1 REPLY
New Member

Re: 6260 DSLAM problem

My previous post seems missing the lower part.

Here it is.

-----------------------------------------------------------------

3660:

!

interface ATM1/0

ip address 172.17.3.36 255.255.255.0

no atm scrambling cell-payload

no atm ilmi-keepalive

pvc 4/100

protocol ip 172.17.3.35 broadcast

encapsulation aal5snap

!

By the way, I got several questions.

1. Does the above implementation support PPPoA and PPPoE?

2. Is the any sample config that corresponds to such implementation.

I can only find config about 6130 and 6400.

Thanks.

Daniel

105
Views
0
Helpful
1
Replies
CreatePlease to create content