64k>T1 circuit upgrade

[tonythompson]

we have a site with a 64k circuit connecting to our wan with a 2524

we will upgrade the circuit to a t1 that will talk frame relay

i have a dead 2524 with a good t1 module

would like pull the 64k module out of the site's 2524 and stick the spare t1 module in

assuming that is possible, what will need to be changed on router config?

mtia

[bobd · Accepted solution]

Should be an easy do for you. Here's the link for configuring the T1 module once you get it installed. http://www.cisco.com/en/US/products/hw/routers/ps233/products_installation_and_configuration_guide_chapter09186a008007e413.html#xtocid1660712

Bob

[tonythompson]

i should pay you $50 for that link.. THANKS!