Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

64k>T1 circuit upgrade

we have a site with a 64k circuit connecting to our wan with a 2524

we will upgrade the circuit to a t1 that will talk frame relay

i have a dead 2524 with a good t1 module

would like pull the 64k module out of the site's 2524 and stick the spare t1 module in

assuming that is possible, what will need to be changed on router config?

mtia

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: 64k>T1 circuit upgrade

Should be an easy do for you. Here's the link for configuring the T1 module once you get it installed. http://www.cisco.com/en/US/products/hw/routers/ps233/products_installation_and_configuration_guide_chapter09186a008007e413.html#xtocid1660712

Bob

2 REPLIES
New Member

Re: 64k>T1 circuit upgrade

Should be an easy do for you. Here's the link for configuring the T1 module once you get it installed. http://www.cisco.com/en/US/products/hw/routers/ps233/products_installation_and_configuration_guide_chapter09186a008007e413.html#xtocid1660712

Bob

New Member

Re: 64k>T1 circuit upgrade

i should pay you $50 for that link.. THANKS!

136
Views
0
Helpful
2
Replies