is this a new flash card? It maybe in a wrong format. Also, not knowing what kind of sup you have the following:
With software releases 7.5(1) and later, additional Flash PC card support was added as follows:
64-MB ATA Flash PC card (MEM-C6K-ATA-1-64M=)Only supported on Supervisor Engine 2. The device name is disk0: and the card requires ROMMON version 7.1(1) or later releases.
64-MB linear Flash PC card (MEM-C6K-FLC64M=)Only supported on Supervisor Engine 1. The device name is slot0: and the card requires ROMMON software release 5.3(1) or later releases.
The MEM-C6K-ATA-1-64M(=) and MEM-C6K-FLC64M= Flash PC cards are not formatted. Although the cards appear to be formatted when first installed, you must format the cards to prevent possible data corruption.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.