Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

6500 Fabric Module display

HI,

I have 6509 with Switch Fabric Module (WS-C6500-SFM) and MSFC2 ...

the problem when I reset the switch the Fabric module LCD display doesnot display the IOS version of the MSFC unless if I reset the FABRIC module after the MSFC comes UP.

we know that the Fabric module will come up before the MSFC because the MSFC is considered as module-15 , but when the fabric module will detect the MSFC IOS version?After how much time? is there is anyway to let the Fabric module to boot after the MSFC so that whenit is boot up it will see the MSFC IOS version???

please help ,

4 REPLIES
Cisco Employee

Re: 6500 Fabric Module display

Can you paste the output of sh ver from the switch? I'll try this in the lab and let you know

New Member

Re: 6500 Fabric Module display

hi,

thanks for your reply.

this is the show version output:

SABIBB_R_1#sh vers

Cisco Internetwork Operating System Software

IOS (tm) MSFC2 Software (C6MSFC2-PSV-M), Version 12.1(8a)E3, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

TAC Support: http://www.cisco.com/tac

Copyright (c) 1986-2001 by cisco Systems, Inc.

Compiled Sun 19-Aug-01 20:57 by hqluong

Image text-base: 0x40008980, data-base: 0x415A2000

ROM: System Bootstrap, Version 12.1(4r)E, RELEASE SOFTWARE (fc1)

BOOTFLASH: MSFC2 Software (C6MSFC2-BOOT-M), Version 12.1(7)E, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

SABIBB_R_1 uptime is 8 weeks, 2 days, 3 hours, 20 minutes

System returned to ROM by error - a Software forced crash, PC 0x4024E784

Running default software

cisco Cat6k-MSFC2 (R7000) processor with 114688K/16384K bytes of memory.

Processor board ID SAD054105FR

R7000 CPU at 300Mhz, Implementation 39, Rev 2.1, 256KB L2, 1024KB L3 Cache

Last reset from power-on

X.25 software, Version 3.0.0.

Bridging software.

22 Virtual Ethernet/IEEE 802.3 interface(s)

509K bytes of non-volatile configuration memory.

16384K bytes of Flash internal SIMM (Sector size 512K).

Configuration register is 0x102

Cisco Employee

Re: 6500 Fabric Module display

I was looking for a sh ver from the switch(layer 2 side)

New Member

Re: 6500 Fabric Module display

hi,

this is the show version of the switch,

SABIBB_S_1> (enable) sh vers

WS-C6509 Software, Version NmpSW: 7.4(3)

Copyright (c) 1995-2002 by Cisco Systems

NMP S/W compiled on Nov 27 2002, 18:27:42

System Bootstrap Version: 6.1(4)

Hardware Version: 3.0 Model: WS-C6509 Serial #: TBA05380834

PS1 Module: WS-CAC-1300W Serial #: SNI05150231

PS2 Module: WS-CAC-1300W Serial #: SNI05110585

Mod Port Model Serial # Versions

--- ---- ------------------- ----------- --------------------------------------

1 2 WS-X6K-SUP2-2GE SAD054102HL Hw : 3.2

Fw : 6.1(4)

Fw1: 6.1(3)

Sw : 7.4(3)

Sw1: 7.4(3)

WS-F6K-PFC2 SAD0538085Y Hw : 2.0

2 16 WS-X6516-GBIC SAD054103Z7 Hw : 3.0

Fw : 6.1(3)

Sw : 7.4(3)

3 1 WS-X6502-10GE SAD062901VW Hw : 1.0

--More-- Fw : 6.3(1)

Sw : 7.4(3)

WS-G6483 SAD062301FV Hw : 1.0

4 1 WS-X6502-10GE SAD062901X3 Hw : 1.0

Fw : 6.3(1)

Sw : 7.4(3)

WS-G6483 SAD062501ZN Hw : 1.0

5 0 WS-C6500-SFM SAD05410351 Hw : 1.2

Fw : 6.1(3)

Sw : 7.4(3)

15 1 WS-F6K-MSFC2 SAD054105FR Hw : 1.2

Fw : 12.1(8a)E3

Sw : 12.1(8a)E3

DRAM FLASH NVRAM

Module Total Used Free Total Used Free Total Used Free

------ ------- ------- ------- ------- ------- ------- ----- ----- -----

1 131072K 76182K 54890K 32768K 13193K 19575K 512K 286K 226K

Uptime is 186 days, 1 hour, 32 minutes

SABIBB_S_1> (enable)

287
Views
0
Helpful
4
Replies
CreatePlease to create content