Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

6500 sup720 pwd mgmt LED status appear orange

we have two sup720,one is active another is standby. We found all LEDs in active mode are shown as green, but in standby mode the power management LED is shown as orange. Is that the correct status or not. If it is not correct status,what should I do?

4 REPLIES
Cisco Employee

Re: 6500 sup720 pwd mgmt LED status appear orange

Can you paste the outputs of

sh mod

sh environment

sh environment status

Community Member

Re: 6500 sup720 pwd mgmt LED status appear orange

Console> (enable) sh mod

Mod Slot Ports Module-Type Model Sub Status

--- ---- ----- ------------------------- ------------------- --- --------

1 1 48 10/100BaseTX Ethernet WS-X6148-RJ45V yes ok

3 3 16 1000BaseX Ethernet WS-X6516A-GBIC no ok

4 4 16 1000BaseX Ethernet WS-X6516A-GBIC no ok

7 7 2 1000BaseX Supervisor WS-SUP720-BASE yes ok

15 7 1 Multilayer Switch Feature WS-SUP720 no ok

8 8 2 1000BaseX Supervisor WS-SUP720-BASE yes standby

16 8 1 Multilayer Switch Feature WS-SUP720 no standby

Mod Module-Name Serial-Num

--- -------------------- -----------

1 SAL0721E05R

3 SAL0720DAKS

4 SAL0720DBAL

7 SAD072302ZB

15 SAD072303Y1

8 SAD072301DH

16 SAD072303Y1

Mod MAC-Address(es) Hw Fw Sw

--- -------------------------------------- ------ ---------- -----------------

1 00-0d-28-b7-a5-70 to 00-0d-28-b7-a5-9f 1.3 5.4(2) 8.1(1)

3 00-0d-28-48-44-40 to 00-0d-28-48-44-4f 1.0 7.2(1) 8.1(1)

4 00-0d-28-48-06-f0 to 00-0d-28-48-06-ff 1.0 7.2(1) 8.1(1)

7 00-0c-ce-64-0a-d2 to 00-0c-ce-64-0a-d3 2.1 7.7(1) 8.1(1)

00-0c-ce-64-0a-d0 to 00-0c-ce-64-0a-d3

00-07-b3-0e-94-00 to 00-07-b3-0e-94-3f

15 00-07-b3-0e-94-3c to 00-07-b3-0e-94-3d 1.2 12.2(14)SX 12.2(14)SX2

8 00-0c-ce-64-0a-de to 00-0c-ce-64-0a-df 2.1 7.7(1) 8.1(1)

00-0c-ce-64-0a-dc to 00-0c-ce-64-0a-df

16 00-07-b3-0e-94-3c to 00-07-b3-0e-94-3d 1.2 12.2(14)SX 12.2(14)SX2

Mod Sub-Type Sub-Model Sub-Serial Sub-Hw Sub-Sw

--- ----------------------- ------------------- ----------- ------ ------

1 Inline Power Module WS-F6K-VPWR 2.0 0.0(0)

7 L3 Switching Engine III WS-F6K-PFC3A SAD07220149 1.1

8 L3 Switching Engine III WS-F6K-PFC3A SAD072300PH 1.1

Console> (enable) sh environment

Environmental Status (. = Pass, F = Fail, U = Unknown, N = Not Present)

PS1: . PS2: N PS1 Fan: . PS2 Fan: N

Chassis-Ser-EEPROM: . Fan1: .

Clock(A/B): A Clock A: . Clock B: .

VTT1: . VTT2: . VTT3: .

Console> (enable) sh environment all

Environmental Status (. = Pass, F = Fail, U = Unknown, N = Not Present)

PS1: . PS2: N PS1 Fan: . PS2 Fan: N

Chassis-Ser-EEPROM: . Fan1: .

Clock(A/B): A Clock A: . Clock B: .

VTT1: . VTT2: . VTT3: .

Intake Exhaust Device 1 Device 2

Slot Temperature Temperature Temperature Temperature

--------------- --------------- --------------- --------------- ---------------

1 28C(50C,65C) 29C(60C,75C) 27C 28C

3 26C(50C,65C) 37C(65C,80C) N/A N/A

4 27C(50C,65C) 37C(65C,80C) N/A N/A

7 27C(45C,60C) 34C(50C,65C) 34C(60C,75C) 32C(45C,60C)

8 27C(45C,60C) 33C(50C,65C) 33C(60C,75C) 35C(45C,60C)

7 (Switch-Eng) 27C(50C,65C) 41C(50C,65C) N/A N/A

8 (Switch-Eng) 27C(50C,65C) 42C(50C,65C) N/A N/A

7 (MSFC) N/A N/A N/A N/A

8 (MSFC) N/A N/A N/A N/A

Chassis Modules

---------------------

VTT1: 32C(85C,100C)

VTT2: 55C(85C,100C)

VTT3: 34C(85C,100C)

PS1 Capacity: 3830.40 Watts (91.20 Amps @42V)

PS2 Capacity: none

PS Configuration : PS1 and PS2 in Redundant Configuration.

Total Power Available: 3830.40 Watts (91.20 Amps @42V)

Total Power Available for Line Card Usage: 3764.04 Watts (89.62 Amps @42V)

Total Power Drawn From the System: 1413.30 Watts (33.65 Amps @42V)

Total Power Drawn by the Chassis: 66.36 Watts ( 1.58 Amps @42V)

Total Inline Power Drawn From the System: 0.000 ( 0.000 Amps @42V)

Total Power Reserved as localpool for modules: 14.28 Watts ( 0.34 Amps @42V)

Remaining Power in the System: 2417.10 Watts (57.55 Amps @42V)

Configured Default Inline Power allocation per port: 15.400 Watts (0.36 Amps @42

V)

Fan tray(s) power Requirement/Usage :

Fan Model PowerRequested PowerAllocated

Watts A @42V Watts A @42V

---- ------------------- ------- ------ ------- ------

1 WS-C6513-CL 298.20 7.10 298.20 7.10

Slot power Requirement/Usage :

Slot Card Type PowerRequested PowerAllocated CardStatus

Watts A @42V Watts A @42V

---- ------------------- ------- ------ ------- ------ ----------

1 WS-X6148-RJ45V 100.38 2.39 100.38 2.39 ok

3 WS-X6516A-GBIC 152.04 3.62 152.04 3.62 ok

4 WS-X6516A-GBIC 152.04 3.62 152.04 3.62 ok

7 WS-SUP720-BASE 315.00 7.50 315.00 7.50 ok

8 WS-SUP720-BASE 315.00 7.50 315.00 7.50 standby

Slot Inline Power Requirement/Usage :

Slot CardType Total Allocated Max H/W Supported Max H/W Supported

To Module (Watts) Per Module (Watts) Per Port (Watts)

---- ------------------- ----------------- ------------------ -----------------

1 WS-X6148-RJ45V 0.000 399.84 7.000

Chassis per slot cooling capacity : 83 cfm

Fan tray(s) cooling capacity :

Fan Model Ver Cooling Ambient FanStatus

capacity temp

---- ------------------- --- -------- ------- ---------

1 WS-C6513-CL 2 1090 cfm - ok

Slot cooling requirement :

Slot CardType Cooling

---- ------------------- -------

1 WS-X6148-RJ45V 30 cfm

3 WS-X6516A-GBIC 30 cfm

4 WS-X6516A-GBIC 30 cfm

7 WS-SUP720-BASE 35 cfm

8 WS-SUP720-BASE 30 cfm

Chassis connector rating : 693.00 Watts (16.50 Amps @42V)

Slot connector rating :

Slot CardType ConnectorRating

Watts A @42V

---- ------------------- -------- ------

1 WS-X6148-RJ45V 693.00 16.50

3 WS-X6516A-GBIC 693.00 16.50

4 WS-X6516A-GBIC 693.00 16.50

7 WS-SUP720-BASE 693.00 16.50

8 WS-SUP720-BASE 693.00 16.50

Console> (enable)

Community Member

Re: 6500 sup720 pwd mgmt LED status appear orange

give me a hand please.... who can answer this question..

Community Member

Re: 6500 sup720 pwd mgmt LED status appear orange

It's a bug in CATOS for SUP720. I had the same issue and cisco opened a bug for it.

--------------------------------------------------------------------------

BugID: CSCec32030

Title: Power Mgmt LED on standby sup720 is amber instead of green

Feature: sup720

Version: 8.1(2)

Integrated:

Severity: 3

State: I

Release Notes:

http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCec32030

550
Views
5
Helpful
4
Replies
CreatePlease to create content