Experienced a problem with a 6509 chassis that the recommendation was to upgrade the rommon level on the sup720s which have msfc3 and native IOS. I have a procedure that shows an upgrade of an individual supervisor and a procedure for upgrading an MSCF3 on a sup720. Both procedures show different code families. I will attach a "sh version" output. Are there a combination of codes that need to be deployed together? For example: a rommmon code for the supervisor, one for the MSFC3, and one for the DFC3. We also deploy redundant supervisors in the switch. Can someone recommend the proper software to upgrade with and the proper procedure for upgrading redundant supervisors? Can you do the upgrade on one supervisor and have it automatically synchronize the redundant supervisor, or do you upgrade each supervisor separately, one at a time?
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...