Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

6506 keep rebooting

every 2 days my router keep rebooting and this is the error i keep getting RxSBIF_SEQ_NUM_ERROR:slot=1, pinnacleMask=0X1, errSeqNum=ff,source Index=0X0, errorType=0X3 is there a fix to this problem

3 REPLIES
Cisco Employee

Re: 6506 keep rebooting

Can you paste the output of sh ver and sh log

New Member

Re: 6506 keep rebooting

Network Management Processor (ACTIVE NMP) Log:

Reset count: 39

Re-boot History: Jan 04 2003 03:59:54 0, Jan 03 2003 22:32:05 0

Jan 01 2003 16:30:47 0, Dec 31 2002 11:59:20 0

Dec 31 2002 09:14:43 0, Dec 31 2002 03:21:07 0

Dec 30 2002 13:37:04 0, Dec 30 2002 02:26:25 0

Dec 29 2002 06:49:59 0, Dec 29 2002 06:36:19 0

Bootrom Checksum Failures: 0 UART Failures: 0

Flash Checksum Failures: 0 Flash Program Failures: 0

Power Supply 1 Failures: 1 Power Supply 2 Failures: 2

Swapped to CLKA: 0 Swapped to CLKB: 0

Swapped to Processor 1: 0 Swapped to Processor 2: 0

DRAM Failures: 0

Exceptions: 0

Loaded NMP version: 6.3(5)

Reload same NMP version count: 40

EOBC Exceptions/Hang: 0

Heap Memory Log:

Corrupted Block = none

NVRAM log:

01. 9/24/2002,11:05:38: RxSBIF_SEQ_NUM_ERROR:slot=1, pinnacleMask=0X1, errSeqNum=ff,source Index=0X0, errorType=0X3

02. 12/19/2002,18:41:07: RxSBIF_SEQ_NUM_ERROR:slot=1, pinnacleMask=0X1, errSeqNum=ff,source Index=0X0, errorType=0X3

03. 12/31/2002,03:22:00: RxSBIF_SEQ_NUM_ERROR:slot=1, pinnacleMask=0X1, errSeqNum=ff,source Index=0X0, errorType=0X3

04. 12/31/2002,09:15:36: RxSBIF_SEQ_NUM_ERROR:slot=1, pinnacleMask=0X1, errSeqNum=ff,source Index=0X0, errorType=0X3

05. 1/3/2003,22:32:58: RxSBIF_SEQ_NUM_ERROR:slot=1, pinnacleMask=0X1, errSeqNum=ff,source Index=0X0, errorType=0X3

06. 1/4/2003,04:00:47: RxSBIF_SEQ_NUM_ERROR:slot=1, pinnacleMask=0X1, errSeqNum=ff,source Index=0X0, errorType=0X3

Module 3 Log:

Reset Count: 37

Reset History: Sat Jan 4 2003, 04:00:55

Fri Jan 3 2003, 22:33:06

Wed Jan 1 2003, 16:31:48

Tue Dec 31 2002, 12:00:21

Module 15 Log:

Reset Count: 40

Reset History: Sat Jan 4 2003, 04:01:13

Fri Jan 3 2003, 22:33:24

Wed Jan 1 2003, 16:32:06

Tue Dec 31 2002, 12:00:40

WS-C6506 Software, Version NmpSW: 6.3(5)

Copyright (c) 1995-2002 by Cisco Systems

NMP S/W compiled on Feb 7 2002, 21:52:11

System Bootstrap Version: 7.1(1)

Hardware Version: 3.0 Model: WS-C6506 Serial #: TBM06224721

PS1 Module: WS-CAC-2500W Serial #: ART062200DC

PS2 Module: WS-CAC-2500W Serial #: ART062200EL

Mod Port Model Serial # Versions

--- ---- ------------------- ----------- --------------------------------------

1 2 WS-X6K-SUP2-2GE SAL0618057E Hw : 3.7

Fw : 7.1(1)

Fw1: 6.1(3)

Sw : 6.3(5)

Sw1: 6.3(5)

WS-F6K-PFC2 SAL06152FKU Hw : 3.2

3 16 WS-X6516-GBIC SAD045204DF Hw : 4.1

Fw : 6.3(1)

Sw : 6.3(5)

15 1 WS-F6K-MSFC2 SAL06152G2V Hw : 2.3

Fw : 12.1(11b)E

Sw : 12.1(11b)E

DRAM FLASH NVRAM

Module Total Used Free Total Used Free Total Used Free

------ ------- ------- ------- ------- ------- ------- ----- ----- -----

1 130944K 62144K 68800K 32768K 7321K 25447K 512K 260K 252K

Cisco Employee

Re: 6506 keep rebooting

Unfortunately, the switch did not save any stack info to the output of show log for the most recent crash. We had a bug(CSCdw57262) due to which the switch would not save stack of certain crashes to NVRAM. This bug is fixed in 6.3(7) and later but I suggest that you upgrade to 6.3(10). Here is the

release notes

http://cio.cisco.com/univercd/cc/td/doc/product/lan/cat6000/relnotes/78_11235.htm

If you cannot upgrade very soon, I suggest that you let a console session

monitor the switch as the switch would dump stack info to the console as well

194
Views
0
Helpful
3
Replies
CreatePlease login to create content