6506 with LMS - SUP 720

[srooplal]

I have the catalyst 6506 as my seed device , SUP720 - I cannot see the device in Campus Manager. I also have a cat 6509 with SUP 720 - can see the device.I have downloaded the latest patch for Campus manager

[n.elms]

Does the SUP720 show as a CDP neighbor on the 6506? Also add the SUP720 as a seed device, so CM will go and discover it, check if it is discovered in unconnected devices view

-Neale.

[srooplal]

CDP is enabled , I can see all my distribution (12 cat 4506's) , it is defined as the seed device , not in the unconnected device view.In the server farm , I have a 6509 with SUP 720 (core 6506 is also the same , same IOS as well)In RME , I can see the device but not in Campus Manager.

[kawng]

If it's managed in RME, and not present in Campus

Manager, it sounds like a misconfiguration.

Verify that you don't have any filters defined in

Discovery Settings that prohibit the 6509's ip address/vlan from being discovered.

What are your SNMP Settings for that device?