Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

6509 Blade Question

We have a few 4006's laying around with spare blades in them and I was wondering if we can put those blades in to a 6509? These are the 48 port blade and a 6G blade. Thank you!

2 REPLIES
Cisco Employee

Re: 6509 Blade Question

Hi,

Cat4000 blades are not compatible with Cat6000 chassis and vice versa. If you tried to insert one in the other, you'd find that the blades are keyed to prevent insertion in the wrong type of chassis.

HTH,

Bobby

Re: 6509 Blade Question

Hi Friend,

Chassis, Supervisors and Blades are not at all interchaneable.

No blades of 4k can be inserted into 6k and vice versa.

Just have a look at this link

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat4000/relnotes/ol_4502.htm

This contains the blades for 4k switch which can be only used in cat4k chassis

The link below has the details of the line cards which can be only used with cat6k chassis

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/relnotes/ol_4498.htm

HTH, if yes please rate the post.

Ankur

91
Views
0
Helpful
2
Replies
CreatePlease login to create content