Yes. When running Native IOS only the configuration is synchronised, you have to manually copy the IOS image onto the 2nd supervisor. Your command for setting the boot system flash is wrong however - bootflash: refers to the MSFC2 bootflash and NOT the Supervisor bootflash.
boot system flash sup-bootflash:c6sup22-pk2sv-mz.121-19.E1.bin
This document gives several answers on frequently asked questions for PFRv3 channel state behavior.
Q1: What are all the channel operational states from a BR (border role) perspective and what are the rules/conditions to be in each st...
The need was to reach an host inside a LAN through a VPN connection managed by the LAN gateway (Cisco 1921).
The LAN gateway performs NAT and there was a dedicate nat rule for the host i wanted to reach through VPN.
I couldn't connect to the hos...
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...