06-26-2006 10:34 AM - edited 03-03-2019 03:49 AM
I thought all cards were could be installed while the 6509 was running but this caused a reload. Any ideas?
06-26-2006 10:46 AM
Hi,
It is true that all cards are hot swappable. However, Online insertion or removal, can, in rare circumstances cause the switch to reload. If the OIR (time between backplane contact of the first and last pin) exceeds 3 seconds, the bus will stall and cause a software forced crash.
Beyond that, the other circumstances that can cause such an event are if there is physical damage to the backplane (bent pins) or the linecard connector.
HTH,
Bobby
*Please rate helpful posts.
06-26-2006 10:48 AM
Thanks for the input. I was unaware of the OIR issue.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide