We just replaced a Supervisor Sup1A module in a 6509. However, the new module MFSC IOS doesn't match the other sup module inside the 6509. I know that both MFCS need to be identical concerning software. Can anyone point me to a document that tells me how to get this done.
In dual router mode, the MSFCs are independent of each other in terms of software upgrades, although you are correct that the IOS version needs to match. So, the standard MSFC upgrade procedure is all you need:
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...