before it was working fine and yesterday i just changed the patch cable which was very long and i used short cable which is tested and working.now when i use it for the port 2/1 its not getting the network and when i see sh port stat its showing for post 2/1 status is "monitor" and all others are connected and not connected.
what it means i wana use the same port for the machine which is win98.
When the status says "monitor" it means that port is a SPAN destination port. See if you have configured 2/1 to be SPAN destination port. Do a "show span" to check for this. You can find more info on the SPAN feature on CCO
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...