Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

6509 power

One 6509 has two powers , one is 1000w , another is 1300w , but fail. Why?

Thanks

3 REPLIES

Re: 6509 power

Hi Ken,

If your switch itself is failing could be the reason you have more number of modules which require high power supplies like 2500 and 4000 watt.

Can you pleae paste the "sh mod" from your switch or can specify what all modules you have in your chassis.

Regards,

Ankur

New Member

Re: 6509 power

Hi Ankur,

Thanks for your reply.

The 6509 had two 1000w powers before, but one failed. I have no another 1000w power, so I get 1300w replace it , but 6509 reports error info. The 1300w power is good.

Thanks

kenson

Re: 6509 power

Hi Ken,

Can you please update what error message you are getting?

Also if it is CATOS can you try this command

set power redundancy enable

Regards,

Ankur

97
Views
0
Helpful
3
Replies
CreatePlease login to create content