Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

6509 with Sup2 MSFC2

Hi, cannot find power or fan requirements for Sup2 MSFC2 for 6509 on the Cisco site.

Do I need to upgrade my power or fan modules if I upgrade this chassis to Sup2 MSFC2 ? Thanks.

I have 2xWS-CAC-1300W in a 6509 non-e

chassic (no fans show up with a show env

or show mod command) I guess they must be

the non high speed versions.

Any ideas, thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: 6509 with Sup2 MSFC2

I believe it's the Sup 720 that introduced the need for high speed fans. Power required for the Sup720 is the 2500W PS (ref. http://www.cisco.com/en/US/partner/products/hw/switches/ps708/products_qanda_item09186a0080159963.shtml)

The data sheet for Sup2 / MSFC2 does not note any special power or cooling requirement: http://www.cisco.com/en/US/partner/products/hw/switches/ps708/products_data_sheet09186a00800887fd.html

Hope this helps. Please rate helpful posts.

2 REPLIES
Hall of Fame Super Silver

Re: 6509 with Sup2 MSFC2

I believe it's the Sup 720 that introduced the need for high speed fans. Power required for the Sup720 is the 2500W PS (ref. http://www.cisco.com/en/US/partner/products/hw/switches/ps708/products_qanda_item09186a0080159963.shtml)

The data sheet for Sup2 / MSFC2 does not note any special power or cooling requirement: http://www.cisco.com/en/US/partner/products/hw/switches/ps708/products_data_sheet09186a00800887fd.html

Hope this helps. Please rate helpful posts.

New Member

Re: 6509 with Sup2 MSFC2

Thanks, I'm just going to go with what we currently have then. I can't find anything to say I need to upgrade power or fans.

125
Views
0
Helpful
2
Replies