Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

6513 switch

I am new to the CLI-based switches and I am trying to find the command to save my running config to the sartup config (if needed).

2 REPLIES
Cisco Employee

Re: 6513 switch

If you are running CAT OS(set based CLI), the config gets saved each time you hit the return/enter key. If your config mode is text, you'll need to save the config with the write command

http://cio.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sw_6_3/cmd_ref/ses_sete.htm#31174

If it's native IOS, you can use write mem like in any other router

New Member

Re: 6513 switch

Great, that is what I thought but I needed to make sure.

Thanks for your help.

98
Views
0
Helpful
2
Replies