Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

7206 Boot Error and could not be rebooted

Hi,

A customer has experienced the problem, his 7206 router can not reboot. It always went to RMON mode even if he reset the register nomber to 0x2102.

Here is the error message during reboot:

*** Cache Error Exception ***

Cache Err Reg = 0xa4005399

data reference, primary cache, data field error , error on SysAD Bus

PC = 0xbfc15728, Cause = 0x0, Status Reg = 0x3040d007

monitor: command "boot" aborted due to exception

System Bootstrap, Version 11.1(10) [dschwart 10], RELEASE SOFTWARE (fc1)

Copyright (c) 1994 by cisco Systems, Inc.

C7200 processor with 32768 Kbytes of main memory

Does anyone help me out this?

Thanks

1 REPLY
New Member

Re: 7206 Boot Error and could not be rebooted

It looks like it may be caused by a memory problem. This link has the same error that you listed.

http://www.cisco.com/en/US/products/hw/routers/ps341/products_tech_note09186a0080094793.shtml

I would reseat the memory and try booting the router again. If it doesn't boot up I would take out all the memory except one chip and see if it boots up. Maybe only one chip is bad.

119
Views
0
Helpful
1
Replies
CreatePlease login to create content