Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

7206 pa-t3+ configuration

I want to configure a 7206 pa-t3+ for frame-relay

and many sub interfaces. I am looking for an example.

What do the following fields in the sh int ser1/0 mean?

rxLOS active, rxLOF inactive, rxAIS inactive

txAIS inactive, rxRAI inactive, txRAI active

2 REPLIES
New Member

Re: 7206 pa-t3+ configuration

bmurry

What you are seeing is the ds3 alarm status for that interface.

rx = receive

tx = transmit

LOS = Loss of Signal

LOF = Loss of Frame

AIS = Alarm Indication Signal

RAI = Remote Alarm Indication

They can also be refered to by the colors Blue, Red, and Yellow depending on type and direction.

Here is a link explaining it all.

http://www.cisco.com/en/US/tech/tk713/tk628/technologies_tech_note09186a00801069ff.shtml

hth

BT

New Member

Re: 7206 pa-t3+ configuration

Hi William,

Good Day! :-)

Here are some useful links regarding your queries.

Comprehensive Guide to Configuring and Troubleshooting Frame Relay

http://www.cisco.com/en/US/tech/tk713/tk237/technologies_tech_note09186a008014f8a7.shtml

PA-T3+ Serial Port Adapter Installation and Configuration

http://www.cisco.com/univercd/cc/td/doc/product/core/cis7505/portadpt/serial/pa-t3plu/index.htm

I hope these are the information that you need. :-)

Best Regards,

Ansley R. Verzosa

110
Views
5
Helpful
2
Replies
CreatePlease to create content