04-16-2004 10:11 AM - edited 03-02-2019 03:03 PM
I want to configure a 7206 pa-t3+ for frame-relay
and many sub interfaces. I am looking for an example.
What do the following fields in the sh int ser1/0 mean?
rxLOS active, rxLOF inactive, rxAIS inactive
txAIS inactive, rxRAI inactive, txRAI active
04-17-2004 06:01 AM
bmurry
What you are seeing is the ds3 alarm status for that interface.
rx = receive
tx = transmit
LOS = Loss of Signal
LOF = Loss of Frame
AIS = Alarm Indication Signal
RAI = Remote Alarm Indication
They can also be refered to by the colors Blue, Red, and Yellow depending on type and direction.
Here is a link explaining it all.
http://www.cisco.com/en/US/tech/tk713/tk628/technologies_tech_note09186a00801069ff.shtml
hth
BT
04-18-2004 04:37 PM
Hi William,
Good Day! :-)
Here are some useful links regarding your queries.
Comprehensive Guide to Configuring and Troubleshooting Frame Relay
http://www.cisco.com/en/US/tech/tk713/tk237/technologies_tech_note09186a008014f8a7.shtml
PA-T3+ Serial Port Adapter Installation and Configuration
http://www.cisco.com/univercd/cc/td/doc/product/core/cis7505/portadpt/serial/pa-t3plu/index.htm
I hope these are the information that you need. :-)
Best Regards,
Ansley R. Verzosa
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: