I just took over a 7206 router from a previous administrator and I cant get the console port to work. I've connected to it with port adapters, and open hyperterm with the usual (9600,8n2 vt100, hardware buffering) and nothing comes up on the screen. I also tried using procom plus and it still wouldn't open. changed cables, adapters, etc.
the only way I can get into the router is to telnet into it. and the previous admin does not know the password (but I know what to do for that)
Has anyone had this proble before, is the console port turned off somehow. This has really got me scratching my head.
I would change your settings on your port speed to 115200 (Hyper-Term or CRT). I have a friend that had the same issue with a 3640 and the config register was set to something than the standard.(that caused the port speed to be bumped up). If that fixes the problem go and look at your config reg and reset to the standard 0x2102 (if that is the way you want your router to boot).
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.