Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

7206 vxr bootflash issues

I have a 7206 vxr router. I have code on slot0: and on slot1: I can read,write and format each slot.. I have the commands intered in the config:

boot system flash slot0:c7200-jk2o3s-mz_121-9_E3.bin

boot system flash slot1:c7200-jk2o3s-mz_121-9_E3.bin

If I remove pcmcia card in slot0: it will not boot off of slot1:

If I tell it to boot off of slot1: it will not boot.

I have tried this on two different routers and it does the same thing.

Is there a differient type of card for slot1:?

Exactualy how do you get the router to have a primary boot and a secondary boot device in case slot0: goes bad?

2 REPLIES
Silver

Re: 7206 vxr bootflash issues

I'm booting a 7206 off slot1 with the same setup. What does the router say at bootup time?

Do you have a boot image in your bootflash?

Community Member

Re: 7206 vxr bootflash issues

DID you solve your problem?

Darko

113
Views
0
Helpful
2
Replies
CreatePlease to create content