Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

8.5.3 System Messages

Folks

Have two Cat 65K's running 8.5.3. I'm seeing two new messages being logged but find no corresponding documentation on CCO. Any pointers for these? I'm fairly sure of one but want to verify!

Thanks

ejc

%SYS-3-PORT_OUT_DISCARD:

%SYS-3-PORT_RX_BADCODE:

1 REPLY

Re: 8.5.3 System Messages

HI Friend,

These messages are new messages which are noted on 8.5 release

%SYS-3-PORT_RX_BADCODE

Explanation This message indicates that a port has been affected with an unknown protocol error. The first [dec] is the module number, [chars] is the port number, and the second [dec] is the number of inbound packets with unknown protocols encountered in the last 30 minutes.

Recommended Action No action is necessary. This message is provided for information only.

Have a look at this link

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sw_8_5/msg_gd/emsg.htm#wp1291687

HTH, if yes please rate the post.

Ankur

113
Views
0
Helpful
1
Replies
CreatePlease to create content