Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

8-port Analog Modem network module (NM-8AM)

hi,

can any body tell me ,what is the modem type of NM-8AM modem module.

i mean wt should i put in the following command as the modem type.

modem autoconfigure type............

should we use CISCO v110 or wt?

regards

sameer

  • Other Network Infrastructure Subjects
4 REPLIES
Silver

Re: 8-port Analog Modem network module (NM-8AM)

Ideally we do not need a modemcap for the NM-AMs so should not have that command in.

The default modemcap microcom_mimic should be fine.

Thanks, Makarand.

Cisco Employee

Re: 8-port Analog Modem network module (NM-8AM)

Internal Analog modems do not need any modemcap..Default is fine unless you want to tweak the modem settings according to application layer requirement..Tejal

New Member

Re: 8-port Analog Modem network module (NM-8AM)

hi,

i dont want to do do any thing with the MODEMCAP instead i just want to know

what should i put in the line configuration mode as a modem type.

according to my knowledge there are two related commands

1)Modem autoconfigure discovery

2)Modem autocinfigure type discovery

but for the discovery router initialise the modems though it works but i need to

know the exact modem type so that if u i have any doubt about any thing then

i'll be sure that there i s nothing wrong with my modem configurations

on my router the when i issue the SHOW MODEMCAP it shows me the following modems names.

codex_3260

usr_courier

usr_sportster

hayes_optima

global_village

viva

telebit_t3000

microcom_hdms

microcom_server

nec_v34

nec_v110

nec_piafs

cisco_v110

mica

so please tell me which one shold i choose.

regards

sameer

Silver

Re: 8-port Analog Modem network module (NM-8AM)

cisco3640#sh modemcap

default

codex_3260

usr_courier

usr_sportster

hayes_optima

global_village

viva

telebit_t3000

microcom_hdms

microcom_server

nec_v34

nec_v110

nec_piafs

cisco_v110

microcom_mimic <====

mica

cisco3640#sh ver | inc c3640

System image file is "flash:c3640-i-mz.121-1.T"

NM-AM default modemcap is microcom_mimic.....just to confirm the same:

1)Execute "sh line x"....will show "modem type is unknown"

2)Under line x add "modem autoconf discovery"...now execute "sh line x"

Will see "Modem type is microcom_mimic"

Thanks, Makarand.

256
Views
0
Helpful
4
Replies
This widget could not be displayed.