8 port analog modem

[admin_2]

is there any issue or difference in the configuration of the 8 port analog modem on the 2600 series and the 2651 router? because i copied the configuration of the nodem from a 2620 and transfer it to the 2651 and it did not work? anyone can tell if there is an issue on this? its just a dial in configuration..sometimes it responds and most of the time not..

[#2]

There should be no issue or difference

between the 2 chassis and the modems;

the NM should work the same in either,

and the config would be identical. If

you are not seeing the calls be answered,

you should ensure the modem cap/config

that you are using, and confirm that you

have the latest firmware loaded.