Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

8 Port RJ45 Primary Card Issue on 7200

I have an 8 port primary Module (RJ45) in 2 7200 routers. Each router has an NPE 225 and is running c7200-is-mz.122-8.T10.bin software. The issue I am having is that I can not open anymore than 4 PRI ports on each router. When I try and configure the 5th port, i get a message about router resources not available.Each router has 128MB of memory in them. Has anybody had issues ith these cards before?

Cisco Employee

Re: 8 Port RJ45 Primary Card Issue on 7200

Can you paste the exact message you are seeing along with the output of sh ver


Re: 8 Port RJ45 Primary Card Issue on 7200

below is the error message and out put of the show ver command

%Insufficient resources to create pri-group - it has been removed

sh ver

Cisco Internetwork Operating System Software

IOS (tm) 7200 Software (C7200-IS-M), Version 12.2(8)T10, RELEASE SOFTWARE (fc1)

TAC Support:

Copyright (c) 1986-2003 by cisco Systems, Inc.

Compiled Fri 30-May-03 02:46 by kellythw

Image text-base: 0x60008940, data-base: 0x615EA000

ROM: System Bootstrap, Version 12.0(19991120:010612) [nlaw-conn_4xe_ECC 112], DEVELOPMENT SOFTWARE

ITC_ISDN_HUB uptime is 2 hours, 15 minutes

System returned to ROM by reload at 14:06:57 bst Tue Aug 19 2003

System restarted at 14:10:29 bst Tue Aug 19 2003

System image file is "disk0:c7200-is-mz.122-8.T10.bin"

cisco 7206VXR (NPE225) processor (revision A) with 114688K/16384K bytes of memory.

Processor board ID 20401674

R527x CPU at 262Mhz, Implementation 40, Rev 10.0, 2048KB L2 Cache

6 slot VXR midplane, Version 2.0

Last reset from power-on

Channelized E1, Version 1.0.

Bridging software.

X.25 software, Version 3.0.0.

Primary Rate ISDN software, Version 1.1.

2 FastEthernet/IEEE 802.3 interface(s)

124 Serial network interface(s)

10 Channelized E1/PRI port(s)

125K bytes of non-volatile configuration memory.

46976K bytes of ATA PCMCIA card at slot 0 (Sector size 512 bytes).

4096K bytes of Flash internal SIMM (Sector size 256K).

Configuration register is 0x2102