I have 2610 series router(has only e0/0) and WS-C3550-48 switch.I need two vlan on ethernet segment and to reach them from wan.is it possible 802.1q trunking(not isl) between router(e0/0) and switch(fa0/48)?
Here is the example.. Also if you want you can make the connection to the 3550 switch as the layer 3 - routed link and then run routing protocol to take care of the routing between the switch and the router -
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...