Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

802.1x authentication

Hello,

Can i use authentication 802.1x for assigning vlan to the end user without using Cisco URT

Thanks

3 REPLIES
VIP Purple

Re: 802.1x authentication

Hello,

apart from VPMS and URT, you can also use a RADIUS server to assign VLANs, check the followinh documents:

802.1x VLAN Assignment Using a RADIUS Server

http://www.cisco.com/en/US/products/hw/switches/ps708/products_configuration_guide_chapter09186a008019f00a.html#wp1029864

Configure Users and Their Attributes on the RADIUS Server

http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a00801d11a4.shtml#topic1-3

HTH,

GP

New Member

Re: 802.1x authentication

Thank you gpauwen;

But is it possible to use 802.1x and radius for vlan assignement on Catalyst 2950/3750

Best regards

Silver

Re: 802.1x authentication

yes. It is possible. Make sure you configure attributes 64 , 65 and 81 on radius server. To enable vlan assignment on switches , following comamnd is required.

aaa authorization network {default} group radius

2950 config

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat2950/12122ea5/2950scg/sw8021x.htm#wp1105952

3750 config

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3750/12225sec/3750scg/sw8021x.htm#wp1062632

Thanks

Salman Z.

167
Views
0
Helpful
3
Replies
CreatePlease login to create content