Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

802 ISDN Fast-Step

I am trying to set up an 802 ISDN router using the fast-step utility. It sets everything up but will not dial out or route to anything. It hands out DHCP addresses and I can ping its address but no dial-out. There are no other screens in the fast-step software that deal with setting routing or interesting-traffic so I assumed it set some default values. what would I look at the find my problem?

2 REPLIES
Bronze

Re: 802 ISDN Fast-Step

The router must see 'interesting' traffic as defined in the DIALER LIST statement in order to trigger the dial out. Check what traffic is specified here. You also need a DIALER GROUP staement under the interface pointing to the DIALER LIST.

New Member

Re: 802 ISDN Fast-Step

Wouldn't fast-step set this up? Where could I find a sample cfg with a simple internet - nat setup? Thanks in Advance

73
Views
0
Helpful
2
Replies
CreatePlease to create content