I have an 804 ISDN connection and my LAN clients can not get past the router. But I can logon to this router remotely and from the router I can ping the LAN clients as well as any public IP. The only thing I see weird is I'm showing 2 Dialer1 connections in sho ip route: (not real IPs)
Gateway of last resort is 0.0.0.0 to network 0.0.0.0
18.104.22.168/8 is variably subnetted, 2 subnets, 2 masks
C 22.214.171.124/24 is directly connected, Dialer1
C 126.96.36.199/32 is directly connected, Dialer1
10.0.0.0/24 is subnetted, 1 subnets
C 10.4.4.0 is directly connected, Ethernet0
S* 0.0.0.0/0 is directly connected, Dialer1
188.8.131.52 is the static IP of this router. I'm not sure what the 184.108.40.206 IP is.
Any ideas on what to check to figure out why all of a sudden my clients can not get past the router. I've double checked and rechecked their TCP/IP settings on their W2K boxes.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.