Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

805 password reset

I have recently received an 805. Following the documentation on password recovery I cannot use the boot command as follows. I assume that because the filename is an empty string there is nothing to boot???

Can someone tell how to progress from here.

TinyROM version 1.2(2)

16:35 08/02/99

Copyright (c) 1998-1999 by cisco Systems, Inc.

All rights reserved.

POST ......... OK. 16MB DRAM, 12MB Flash.

boot# set

set baud =9600

set data-bits =8

set parity =none

set stop-bits =1

set console-flags =0

set mac-address =00B0.C28B.53EA

set unit-ip =0.0.0.0

set serv-ip =0.0.0.0

set netmask =0.0.0.0

set gate-ip =0.0.0.0

set pkt-timeout =4

set tftp-timeout =16

set boot-action =flash

set file-name =""

set watchdog =off

set prompt ="boot"

set ios-conf =0x2102

boot# set ios-conf = 142

boot# boot

boot: failed, "no such file"

boot#

2 REPLIES
Silver

Re: 805 password reset

Have you tried using 0x142 instead of 142 ?. Also if the flash is corrupt or missing you can use 0x141 instead.

New Member

Re: 805 password reset

Yes, I tried those options but to no avail. I thought the 0x141 might do the trick but it still behaves the same.

TinyROM version 1.2(2)

16:35 08/02/99

Copyright (c) 1998-1999 by cisco Systems, Inc.

All rights reserved.

POST ......... OK. 16MB DRAM, 12MB Flash.

auto-boot: failed, "no such file"

Booting "c805-y6-mw.121-3" ... failed, "user abort"

Booting "S8CHL-12.0.7T" .

TinyROM version 1.2(2)

16:35 08/02/99

Copyright (c) 1998-1999 by cisco Systems, Inc.

All rights reserved.

POST ......... OK. 16MB DRAM, 12MB Flash.

boot# set

set baud =9600

set data-bits =8

set parity =none

set stop-bits =1

set console-flags =0

set mac-address =00B0.C28B.53EA

set unit-ip =0.0.0.0

set serv-ip =0.0.0.0

set netmask =0.0.0.0

set gate-ip =0.0.0.0

set pkt-timeout =4

set tftp-timeout =16

set boot-action =flash

set file-name =""

set watchdog =off

set prompt ="boot"

set ios-conf =0x2102

boot# set ios-conf = 0x141

boot# boot

boot: failed, "no such file"

boot#

171
Views
0
Helpful
2
Replies