I have a Carrier Detect, however, I am not receiving atm cells. I assume I would receive cell from the WAN side, even if my PPPoE and CHAP failed. It is not the ISP/Bell South as it functions with an extenal modem and D-Link Router.
Here is my config - I based it on one in my area that is currently working with Bell South.
Can you see any mistakes?
Albert827#sh run
Building configuration...
Current configuration : 1565 bytes
!
version 12.1
no service single-slot-reload-enable
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname Albert827
!
logging rate-limit console 10 except errors
enable secret 5 $1$h/UC$6jnaRVt59RzRwqxLMHeML.
enable password 7 0707
!
username albert password 0 0707
ip subnet-zero
no ip finger
ip dhcp excluded-address 192.168.0.1
!
ip dhcp pool client
import all
network 192.168.0.0 255.255.255.0
default-router 192.168.0.2
dns-server 205.152.144.252
!
no ip dhcp-client network-discovery
call rsvp-sync
!
interface Ethernet0
ip address 192.168.0.2 255.255.255.0
ip nat inside
no cdp enable
hold-queue 32 in
!
interface ATM0
no ip address
no atm ilmi-keepalive
pvc 0/16 ilmi
!
pvc 8/35
encapsulation aal5mux ppp dialer
dialer pool-member 1
!
bundle-enable
dsl operating-mode auto
hold-queue 224 in
!
interface Dialer0
ip address negotiated
ip nat outside
encapsulation ppp
dialer-group 1
no cdp enable
ppp authentication chap callin
ppp chap hostname miami65@bellsouth.net
ppp chap password 7 0707
!
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer0
no ip http server
!
ip nat inside source list 101 interface Dialer0 overload
access-list 101 permit ip 192.168.0.0 0.0.0.255 any
dialer-list 1 protocol ip permit
no cdp run
!
voice-port 1
!
voice-port 2
!
voice-port 3
!
voice-port 4
!
!
line con 0
exec-timeout 120 0
transport input none
stopbits 1
line vty 0 4
exec-timeout 120 0
password 7 0707
login local
!
no scheduler max-task-time
end
