836 - Passive Interface Dialer1 is not working

[nisele]

Hi Guys,

i have configured a eigrp routing process with "passive interface" on dialer1 because i don't want routing updates or any eigrp related things to be sended to the internet provider. But it seems that eigrp hellos a still send out of the dialer1 interface.

The are the config parts i have configured:

router eigrp 1

passive-interface Dialer1

network 192.168.32.0

network 0.0.0.0

no auto-summary

SKYNET-GW#debug ip packet det

IP packet debugging is on (detailed)

SKYNET-GW#

4d09h: IP: s=192.168.32.199 (local), d=224.0.0.10 (Ethernet0), len 60, sending broad/multicast, proto=88

4d09h: IP: s=217.233.231.53 (local), d=224.0.0.10 (Dialer1), len 60, sending broad/multicast, proto=88

4d09h: IP: s=192.168.32.199 (local), d=224.0.0.10 (Ethernet0), len 60, sending broad/multicast, proto=88

Where is the problem, what is my mistake? Don't wonder about the "network 0.0.0.0", this propagates the default route of my internet gateway to my lab.

Best Regards, Niko

[rais]

Did you try debugging eigrp hellos? There, you will find these packets are being suppressed to go out from Dialer1.

Hope this helps.

[ruwhite]

This looks like it could be related to CSCec42182, which is awiating further information from the TAC engineer, I think.

Russ.W

[nisele]

Hi Russ,

thanks for this, i think my problem hit this Bug exactly. Can i help delivering informations for this Case? Which Informations will be needed?

Regards, Niko

[ruwhite]

I don't know... I'd contact obardenh@cisco.com, and see if he can use the information from your network in some way to help him get what he needs.

:-)

Russ.W