06-08-2006 12:54 AM - edited 03-03-2019 03:33 AM
hi
this is a partial out from the sjow interface f0/1.
8586 collision;3 interface reset
;76485 deferred
what this out mean,if error exist how cab i fix it
10xs for help.
ali
B/W. this int is connected to a wirless unites.and this wireless units has connected to the main office
06-08-2006 01:02 AM
Hi Ali,
This out means output. As this is just a partial output from "sh interface" command.
Anyways there are lot of collisions seen which can be due to speed and duplex mismatch. Can you paste the output of "sh interface fa0/1" and also "sh run intarface fa0/1".
Also if speed and duplex settings are ok then it could be a cable problem also.
Regards,
Ankur
06-08-2006 01:10 AM
HI FRIEND!
ANKUR;SORRY THERE IS TYPING ERROR IN THAT POST
SORRY FRIEND
ALI
06-08-2006 01:12 AM
HI
DID U MEAN CABLING ERROR FROM THE TRANCIVER TO THE SWITCH.OR FROM THE UNITS TO THE TRANCEIVER?
ALI
06-08-2006 01:14 AM
Hi Ali,
First check the speed and duplex settings and if that is ok then check the cabling from the switch to where ever it is connected as the errror is reported in the switch interface to whatever is directly connected with this interface check the cabling between that and switch.
Regards,
Ankur
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: