Yes you can configure each port in a different subnet. You can achieve that by using a unique VLAN per port. The 871 supports up to four VLANs and each switchport could be assigned to a different VLAN as desired.
My experience is, you can configure 2 VLAN's only; the "vlan database" configuration will let you add only 1 VLAN. The switch ports worked well in access-mode, I attemted to configure them in the trunk mode but they have not worked the way I expected.
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...