Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

881 k9 (3G) router problems with interface cellular 0

Hello I need some help I have three routers 811 (independent), and the interface cellular 0 resets in all three, someone knows something about this

Oct 30 12:15:10.501: %CISCO800-2-MODEM_REMOVAL_DETECTED: Cellular0 modem is now REMOVED

Oct 30 12:15:10.501: %CISCO800-2-CELLULAR_INTERFACE_NOT_SHUTDOWN: WARNING: Cellular0 interface should be shutdown before removing modem. Reload Required to reset interface

Oct 30 12:15:17.501: %CISCO800-2-MODEM_INSERTED_DETECTED: Cellular0 modem is now INSERTED

Oct 30 12:15:25.873: %LINK-3-UPDOWN: Interface Cellular0, changed state to down

Oct 30 12:15:43.313: %LINK-3-UPDOWN: Interface Cellular0, changed state to up

Oct 30 12:15:56.261: %CISCO800-2-MODEM_UP: Cellular0 modem is now UP.

Oct 31 18:18:16.306: %CISCO800-2-MODEM_REMOVAL_DETECTED: Cellular0 modem is now REMOVED

Oct 31 18:18:16.306: %CISCO800-2-CELLULAR_INTERFACE_NOT_SHUTDOWN: WARNING: Cellular0 interface should be shutdown before removing modem. Reload Required to reset interface

Oct 31 18:18:23.402: %CISCO800-2-MODEM_INSERTED_DETECTED: Cellular0 modem is now INSERTED

Oct 31 18:18:32.134: %LINK-3-UPDOWN: Interface Cellular0, changed state to down

Oct 31 18:18:49.574: %LINK-3-UPDOWN: Interface Cellular0, changed state to up

Oct 31 18:19:02.518: %CISCO800-2-MODEM_UP: Cellular0 modem is now UP.

Oct 31 18:19:11.918: %LINK-3-UPDOWN: Interface Cellular0, changed state to down

Oct 31 18:19:24.062: %LINK-3-UPDOWN: Interface Cellular0, changed state to up

Nov  2 23:13:52.993: %CISCO800-2-MODEM_REMOVAL_DETECTED: Cellular0 modem is now REMOVED

Nov  2 23:13:52.993: %CISCO800-2-CELLULAR_INTERFACE_NOT_SHUTDOWN: WARNING: Cellular0 interface should be shutdown before removing modem. Reload Required to reset interface

Nov  2 23:13:59.577: %CISCO800-2-MODEM_INSERTED_DETECTED: Cellular0 modem is now INSERTED

Nov  2 23:14:08.801: %LINK-3-UPDOWN: Interface Cellular0, changed state to down

Nov  2 23:14:26.205: %LINK-3-UPDOWN: Interface Cellular0, changed state to up

Nov  2 23:14:39.229: %CISCO800-2-MODEM_UP: Cellular0 modem is now UP.

---------------------------------------------------------------------------------------------------------------

!

interface Cellular0

no ip address

ip mtu 1400

encapsulation ppp

load-interval 30

dialer in-band

dialer pool-member 1

dialer-group 1

async mode interactive

!

----------------------------------------------------------------------------------------------------------------

thank you very much

Everyone's tags (1)
3 REPLIES
New Member

881 k9 (3G) router problems with interface cellular 0

Hello Jonathan,

Did you get any answer ?

Unfortunatly, I don't have one for you, but I have the same problem.

interface Cellular0

ip address negotiated

ip nat outside

ip virtual-reassembly in

encapsulation ppp

dialer in-band

dialer idle-timeout 30

dialer string gsm

dialer-group 1

async mode interactive


Regards,

Andre

881 k9 (3G) router problems with interface cellular 0

make

sh cell 0 all

and put here

New Member

881 k9 (3G) router problems with interface cellular 0

There you go :

Hardware Information

====================

Modem Firmware Version = K2_0_7_35AP C:/WS/F

Modem Firmware built = 03/04/10

Hardware Version = 1.0

International Mobile Subscriber Identity (IMSI) = 302220000399572

International Mobile Equipment Identity (IMEI) = 353223046400793

Integrated Circuit Card ID (ICCID) = 8912230000006695480

Mobile Subscriber International Subscriber

IDentity Number (MSISDN) = 14189657295

Factory Serial Number (FSN) = C9E364100171007

Modem Status = Online

Current Modem Temperature = 32 deg C, State = Normal

PRI SKU ID = 9993559, SKU Rev. = 1.2

Profile Information

====================

Profile password Encryption level: 7

Profile 1 = ACTIVE*

--------

PDP Type = IPv4

PDP address = 999.999.999.999

Access Point Name (APN) = staticipeast.telus.com

Authentication = CHAP

Username: user1, Password: 030752180500

* - Default profile

Data Connection Information

===========================

Data Transmitted = 10798496 bytes, Received = 10733505 bytes

Profile 1, Packet Session Status = ACTIVE

        IP address = 999.999.999.999

        Negotiated QOS Parameters:

        Precedence = Low Priority, Delay = Class 3

        Reliability = Unack GTP, LLC, Ack RLC, Protected data

        Peak = 256 kB/sec, Mean = 50000 kB/hr

        Traffic Class = Interactive

        Uplink Max = Unknown, Guaranteed = Subscribed

        Downlink Max = Unknown, Guaranteed = Subscribed
        Max SDU size = 1500 bytes
        SDU error ratio = 1E-4, BER = 1E-5
Profile 2, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 3, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 4, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 5, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 6, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 7, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 8, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 9, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 10, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 11, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 12, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 13, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 14, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 15, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 16, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state

Network Information
===================
Current Service Status = Normal, Service Error = None
Current Service = Combined
Packet Service = HSPA (Attached)
Packet Session Status = Active
Current Roaming Status = Home
Network Selection Mode = Automatic
Country = CAN, Network = TELUS
Mobile Country Code (MCC) = 302
Mobile Network Code (MNC) = 220
Location Area Code (LAC) = 11654
Routing Area Code (RAC) = 154
Cell ID = 14371
Primary Scrambling Code = 204
PLMN Selection = Automatic
Registered PLMN = TELUS , Abbreviated =
Service Provider =

Radio Information
=================
Radio power mode = ON
Current Band = WCDMA 850, Channel Number = 1087
Current RSSI = -85 dBm
Band Selected = Auto
Number of nearby cells = 1
Cell 1
        Primary Scrambling Code = 0xCC
        RSCP = -86 dBm, ECIO = -4 dBm


Modem Security Information
==========================
Card Holder Verification (CHV1) = Disabled
SIM Status = OK
SIM User Operation Required = None
Number of Retries remaining = 3

Hardware Information

====================

Modem Firmware Version = K2_0_7_35AP C:/WS/F

Modem Firmware built = 03/04/10

Hardware Version = 1.0

International Mobile Subscriber Identity (IMSI) = 302220000399572

International Mobile Equipment Identity (IMEI) = 353223046400793

Integrated Circuit Card ID (ICCID) = 8912230000006695480

Mobile Subscriber International Subscriber

IDentity Number (MSISDN) = 14189657295

Factory Serial Number (FSN) = C9E364100171007

Modem Status = Online

Current Modem Temperature = 32 deg C, State = Normal

PRI SKU ID = 9993559, SKU Rev. = 1.2

Profile Information

====================

Profile password Encryption level: 7

Profile 1 = ACTIVE*

--------

PDP Type = IPv4

PDP address = 999.999.999.999

Access Point Name (APN) = staticipeast.telus.com

Authentication = CHAP

Username: user1, Password: 030752180500

* - Default profile

Data Connection Information

===========================

Data Transmitted = 10798496 bytes, Received = 10733505 bytes

Profile 1, Packet Session Status = ACTIVE

        IP address = 999.999.999.999

        Negotiated QOS Parameters:

        Precedence = Low Priority, Delay = Class 3

        Reliability = Unack GTP, LLC, Ack RLC, Protected data

        Peak = 256 kB/sec, Mean = 50000 kB/hr

        Traffic Class = Interactive

        Uplink Max = Unknown, Guaranteed = Subscribed

        Downlink Max = Unknown, Guaranteed = Subscribed
        Max SDU size = 1500 bytes
        SDU error ratio = 1E-4, BER = 1E-5
Profile 2, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 3, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 4, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 5, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 6, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 7, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 8, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 9, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 10, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 11, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 12, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 13, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 14, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 15, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 16, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state

Network Information
===================
Current Service Status = Normal, Service Error = None
Current Service = Combined
Packet Service = HSPA (Attached)
Packet Session Status = Active
Current Roaming Status = Home
Network Selection Mode = Automatic
Country = CAN, Network = TELUS
Mobile Country Code (MCC) = 302
Mobile Network Code (MNC) = 220
Location Area Code (LAC) = 11654
Routing Area Code (RAC) = 154
Cell ID = 14371
Primary Scrambling Code = 204
PLMN Selection = Automatic
Registered PLMN = TELUS , Abbreviated =
Service Provider =

Radio Information
=================
Radio power mode = ON
Current Band = WCDMA 850, Channel Number = 1087
Current RSSI = -85 dBm
Band Selected = Auto
Number of nearby cells = 1
Cell 1
        Primary Scrambling Code = 0xCC
        RSCP = -86 dBm, ECIO = -4 dBm


Modem Security Information
==========================
Card Holder Verification (CHV1) = Disabled
SIM Status = OK
SIM User Operation Required = None
Number of Retries remaining = 3

1921
Views
0
Helpful
3
Replies
CreatePlease login to create content