Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

a headache problem....

a central office and a remtoe office ,in central office there is a cisco 2600 with a bri interface(s/t) ,and in remtoe office there only is a PC with a TA (U),so I can conncet between the two through isdn network.The problem come out when I dial into cetral offcie from remote office.

" recovery on timer expriy",the router tell me that.What dose this mean ?What can I do with it?

Also ,here is my configuration.

username test password 0 password

interface bri0/0

encap ppp

ppp authentication chap

ppp chap hostname test

ppp chap password 0 password

dialer pool-memeber 1

interface dailer 1

ip addr 192.168.0.1 255.255.255.0

peer default ip addr 192.168.0.2

dialer remote-name test

dialer pool 1

dialer-group 1

......

Is it right?

1 REPLY

Re: a headache problem....

Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (http://www.cisco.com/tac) or speak with a TAC engineer. You can open a TAC case online at http://www.cisco.com/tac/caseopen

If anyone else in the forum has some advice, please reply to this thread.

Thank you for posting.

101
Views
0
Helpful
1
Replies