Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

a lot of input errors, 0 output , help me

Hi, all

4506 L3 port G5/25-26, there are lot of input errors, 0 output

these two ports are set channel to 3560, 3560 ports are ok, no any errors.

I checked the duplex and speed, all of ports are auto (4506 and 3560)

**********************************

104653383616 packets input, 116665685136161 bytes, 0 no buffer

Received 483639942 broadcasts (455841929 multicast)

0 runts, 0 giants, 0 throttles

15065457 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored

0 input packets with dribble condition detected

48228810084 packets output, 9429961238952 bytes, 0 underruns

0 output errors, 0 collisions, 0 interface resets

*****************************************

4506 version: 12.2(25)SG

3560 version: 12.2(25r)SE1

any ideals, Thanks

2 REPLIES
New Member

Re: a lot of input errors, 0 output , help me

Drop one port out of the channel and see if the errors persist. If so, add it back and drop the other. Errors like this tend to be cable/fiber related, so eliminate that first.

New Member

Re: a lot of input errors, 0 output , help me

I am also having problem with this. Ours is not on a layer 3 port however. It's a port on our 4506 which is connected directly to a computer.

292
Views
0
Helpful
2
Replies