a strange problem

[ybzhang]

I have two cisco2948g-l3,here I marked as A and B.And they are all worked after configured.

Now,I found that switch A's Command Line appeared bad characters by console.But Switch B is Ok.I do nothing to my PC.(9600,8....)

As I use another PC,two switch are OK.

[rokibbe]

There definitely appears to be something going on, particularly if you can use a different PC and everything's ok. Double check the settings under LINE CON 0 to make sure that they are indeed the 9600-8-N-1 you think they are, or you want them to be.