I have currently installed a few Catalyst 6509's, with MSFC's the works. My AAA does not seem to work. From the MSFC's the AAA works fine but from the CAT6509 SUP-Modules I am experiencing problems. I can ping the ACS server but fail to authenticate. Between the switches and the ACS is a firewall. For now the rules are pretty open. AT the end of the day it should work if I can ping the ACS. Any idea's? Does it use a different port number than what the IOS based products?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...