Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

AAA Model for CATOS

I've been trying to find AAA model access configs for 2950's running CATOS. Are there any command references I can review to add radius authentication to the catos similar to IOS12.x?

Thanks.

IOS AAA MODEL:

username adin priv xx password xxx

username admin priv xx password xxx

service password-encryption

aaa new-model

aaa authentication login default local-case radius

aaa authorization exec default local radius if-authenticated

radius-server host 192.1.1.1

radius-server timeout 2

radius-server key pwd111

1 ACCEPTED SOLUTION

Accepted Solutions

Re: AAA Model for CATOS

Hi Friend,

2950 is not at all a CATOS switch it is again an IOS switch.

I think you may be having 2948G or someother switch having CATOS like 4k or 6k.

If you are looking for AAA config or infact to be more precise radius configs for CATOS switch have a look at this link

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat4000/8_1/config/authent.htm#1020746

hope thats helps , if yes please rate the post.

Ankur

2 REPLIES

Re: AAA Model for CATOS

Hi Friend,

2950 is not at all a CATOS switch it is again an IOS switch.

I think you may be having 2948G or someother switch having CATOS like 4k or 6k.

If you are looking for AAA config or infact to be more precise radius configs for CATOS switch have a look at this link

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat4000/8_1/config/authent.htm#1020746

hope thats helps , if yes please rate the post.

Ankur

New Member

Re: AAA Model for CATOS

Yes, I meant to say 2948.

Thanks.

-fz

278
Views
0
Helpful
2
Replies